[EN]Alphacool HDX - M.2 Cooler e bending tool per tubi

Allegato 1745
Alphacool is now the first manufacturer to offer a mini cooler for M.2 SSDs.
This cooler provides passive cooling that ensures better performance power. Its original appearance also lets it fit seamlessly into any system.
Everything needed for easy setup is included: thermal pads, clips, and two cooling plates. First, the thermal pads are placed onto the chips. Then, the cooling plates are placed on top of these and fastened with the clips.
The slight height of the cooling plates ensures they aren’t in the way during installation, as well as letting them quickly dissipate heat!
Technical Specifications:

• Material: aluminium
• Colour: black
• Cooling plate dimensions (LxWxH): 68.3 x 22 x 2 mm

Please note:
The Alphacool HDX - M.2 Cooler is compatible with SSDs that have single- or double-sided chip placement. Suitable thermal pads are included with the cooler.
Allegato 1744


Alphacool now has a bending tool for different sizes, which makes laying and bending HardTubes super easy!
HardTubes with a thickness of 12-14 mm as well as 16mm are all no problem. Curves of up to 180° bend neatly and easily. With the red rubber measurement guide, you can set the size of the straight section of tubing in centimeters.
Technical Specifications:

• Material: nylon
• Colour: black
• HardTube sizes: 12-14 mm, 16 mm
• Angles: 0°-180°

Dimensions (LxWxHx): 178 x 137 x 20 mm

Prezzi, tasse incluse, di 13,50€ per l'utensile piegatubi e di 12,59€ per il dissipatore SSD.

ma con lo spessore aggiunto dal dissipatore, l'SSD puo poi essere montato "sdraiato" ? (su alcune schede madri c'è la possibilità di montarlo "il piedi")
certo che un pò di alettatura potevano farcela...