Salve, dopo aver terminato da poco l'ultimo mio progetto Project Prime, ne inizio un altro su un case ITX sponsorizzato da Phanteks, l'Evolv ITX. Il tema della build sarà bianco/nero, il case sarà wrappato e saranno inseriti gli sponsor sul laterale, è in progetto inoltre l'utilizzo di altri decals. Al suo interno posizionerò un sistema a liquido con due radiatori da 240mm, vaschetta cilindrica, pompa, waterblock cpu e gpu.
Un primo concept della build, qui vedete il drago MSI che però non sarà presente nella build finale in quanto inizialmente pensavo di usare una scheda madre MSI Z97 ITX, ma nessuna è compatibile con SSD M.2 2280 per cui la mia scelta è caduta su ASUS anche stavolta.
Questo progetto è sponsorizzato da
Con la partecipazione di
Hardware
CPU: INTEL i7 4790K
MB: ASUS Z97 MAXIMUS IMPACT VII
RAM: AVEXIR BLITZ 1.1 1600MHZ 2x4GB
VGA: ZOTAC GTX 980
SSD: PX-G128M6e + SAMSUNG EVO 850 500GB
HDD: WD GREEN 2.5' 2TB
PSU: SEASONIC SNOW SILENT 1050W PLATINUM
CASE: PHANTEKS EVOLV ITX
Liquid Cooling
CPU: SWIFTECH Apogee XL Black Body
VGA: SWIFTECH KOMODO-NV-GTX9
PUMP: SWIFTECH MCP50X
RADIATORS: 2 x ALPHACOOL ST30 240MM
RESERVOIR: ALPHACOOL CAPE CORP 10LT
FITTINGS: COOLFORCE
FAN: 4 x CORSAIR SP120 HP + 1 x CORSAIR AF140 Quiet Ed
CONTROLLER: AQUACOMPUTER AQUAERO 5LT
Foto del case al naturale
Il case dopo il wrapping
Al prossimo update!
Ultima modifica di Mark011; 04-07-2015 alle 07:53 PM
  Sponsored Advertisements | |
  Guest | |
To Remove Ads... Please   Login or Register   | |
Corsair HX520W / Intel G2020 + Prolimatech Lynx / MSI Z68MA-ED55 (B3) / Kingstone value 2x4Gb / Asus GTX950-OC-2GD5 / SSD Intel X25-M G2 80Gb + HD Samsung EG 2Tb / Eizo FlexScan S2431W
seguo!
Che peliccola hai usato per il wrap?
Bello
Le mie mod:
COPPERDOG /BLACK'n'BROWN / MARBLES e GRANIT / BEATFENIX / GOLDEN TWINS /
SUPERNOVA / ELEGANTIA
incredibile come cambi faccia con un semplice rivestimento, seguo ovviamente
again........bu?u?b?q s? uo??n?o??? ???........niaga
seguo curioso
Hardware revolution...mAtx & TitanX
Salve, oggi ho aperto un pò di pacchetti. Plextor mi ha inviato uno dei loro SSD M6e M.2 da utilizzare in questa build, compatibile con la tecnologia PlexTurbo 2.0. Plexturbo è una soluzione intelligente di RAM Caching che utilizza la RAM di sistema per aumentare le prestazioni dell'SSD oltre ogni limite. Si ringrazia Plextor per il sample fornito. Di seguito un pò di informazioni e foto.
PlexTurbo Technology
PlexTurbo 2.0 has three main advantages;
Performance Boost
The SSD uses 1/4 of the DRAM of the system (max 4GB) as cache. The Intelligent Boost Engine® (IBE) technology, automatically detects hot data (frequently accessed) and cold data (occasionally accessed) and applies the best caching patterns for higher performance.
Safe Power Lost
The information is written simultaneously in the cache of the system as well as the SSD, in case of a power interruption or system crash, data loss will be minimized.
Life Extension Mechanism
The SSD reduces unnecessary rewriting of redundant data by using smart algorithms, in other words, instead of overwriting an entire file, the existing data is compared and unnecessary writes are avoided, increasing the life of the SSD.
Ieri mi è arrivata anche la Scheda Madre, un ASUS Z97 MAXIMUS IMPACT VII
Infine un test di assemblaggio parziale.
Ecco un test del PLEXTOR M6E M.2 SSD
AVEXIR mi ha fornito un kit di ram BLITZ 1.1 per questa build, i led sono bellissimi, presto farò un video.