Risultati da 1 a 2 di 2
  1. #1
    Redazione
    Data Registrazione
    Apr 2008
    Messaggi
    2,308
    Thanked: 0

    [EN]Alphacool HDX - M.2 Cooler e bending tool per tubi

    1012609-657c005587b64b.jpg
    Alphacool is now the first manufacturer to offer a mini cooler for M.2 SSDs.
    This cooler provides passive cooling that ensures better performance power. Its original appearance also lets it fit seamlessly into any system.
    Everything needed for easy setup is included: thermal pads, clips, and two cooling plates. First, the thermal pads are placed onto the chips. Then, the cooling plates are placed on top of these and fastened with the clips.
    The slight height of the cooling plates ensures they aren’t in the way during installation, as well as letting them quickly dissipate heat!
    Technical Specifications:

    • Material: aluminium
    • Colour: black
    • Cooling plate dimensions (LxWxH): 68.3 x 22 x 2 mm


    Please note:
    The Alphacool HDX - M.2 Cooler is compatible with SSDs that have single- or double-sided chip placement. Suitable thermal pads are included with the cooler.
    1012739-1.jpg


    Alphacool now has a bending tool for different sizes, which makes laying and bending HardTubes super easy!
    HardTubes with a thickness of 12-14 mm as well as 16mm are all no problem. Curves of up to 180° bend neatly and easily. With the red rubber measurement guide, you can set the size of the straight section of tubing in centimeters.
    Technical Specifications:

    • Material: nylon
    • Colour: black
    • HardTube sizes: 12-14 mm, 16 mm
    • Angles: 0°-180°

    Dimensions (LxWxHx): 178 x 137 x 20 mm

    Prezzi, tasse incluse, di 13,50€ per l'utensile piegatubi e di 12,59€ per il dissipatore SSD.


  2.   Sponsored Advertisements
      Guest
    To Remove Ads... Please   Login or Register  
  3. #2
    CTzen
    Data Registrazione
    Jul 2015
    Località
    Padova
    Messaggi
    221
    Thanked: 30
    ma con lo spessore aggiunto dal dissipatore, l'SSD puo poi essere montato "sdraiato" ? (su alcune schede madri c'è la possibilità di montarlo "il piedi")
    certo che un pò di alettatura potevano farcela...



Discussioni Simili

  1. A proposito di tubi rigidi
    Di L!qu!d nel forum Liquid cooling generale
    Risposte: 6
    Ultimo Messaggio: 27-10-2015, 12:31 PM
  2. Nuovi tubi EPDM da EK
    Di Redazione nel forum News
    Risposte: 2
    Ultimo Messaggio: 18-04-2013, 09:55 AM
  3. Che dite cambio tubi?
    Di Arthlan nel forum Configurazioni e worklog
    Risposte: 6
    Ultimo Messaggio: 05-02-2013, 03:28 PM
  4. Alphacool NexXxoS RXP-1 RAM-Cooler
    Di Redazione nel forum News
    Risposte: 0
    Ultimo Messaggio: 20-01-2012, 03:22 PM
  5. Alphacool Heatmaster 2 Cooler
    Di Redazione nel forum Comunicati stampa dai partner
    Risposte: 0
    Ultimo Messaggio: 20-01-2012, 02:12 PM

Permessi di Scrittura

  • Tu non puoi inviare nuove discussioni
  • Tu non puoi inviare risposte
  • Tu non puoi inviare allegati
  • Tu non puoi modificare i tuoi messaggi
  •