Pagina 1 di 2 12 UltimaUltima
Risultati da 1 a 10 di 12

Discussione: Come pulire un wb

  1. #1
    Junior CTzen
    Data Registrazione
    Nov 2011
    Località
    Suzzara
    Messaggi
    125
    Thanked: 0

    Come pulire un wb

    Ciao a tutti, vorrei sapere come pulire l'interno del wb, io ho un supremacy evo whyte della Ek, basta l'acqua distillata?
    CPU: CPU:I7 5820k Ram: 32gb G.Skill Ripjaws 4 2800Mhz GPU: Sli 970 Galax HOF HD: samsung 250gb 850 EVO, 3 WD Blue 1tb, Alimentatore Corsair ax1500i Masterizzatore Blu Ray Asus BW16D1HT Scheda audio Creative ZX Nzxt Hue RGB Tastiera Corsair K70 RGB Mouse Mad Catz Rat 9 Monitor: Dell u3415


  2.   Sponsored Advertisements
      Guest
    To Remove Ads... Please   Login or Register  
  3. #2
    Very important CTzen L'avatar di heavydog70
    Data Registrazione
    Dec 2011
    Località
    Monza
    Messaggi
    2,398
    Thanked: 125
    Sarebbe meglio aprirlo, controllare che non vi sia accumulo di sporcizia nella matrice, eventualmente rimuoverla con uno spazzolino e del detersivo (solitamente io uso il Vim Clorex in polvere, sgrassa bene e non intacca)


  4. #3
    CTzen Officer L'avatar di fraggerman
    Data Registrazione
    Feb 2009
    Località
    Burago Di Molgora
    Messaggi
    5,006
    Thanked: 47
    quoto, aprilo e puliscilo per bene, senza usare "cose" troppo aggressive


  5. #4
    Junior CTzen L'avatar di Arch_Stanton
    Data Registrazione
    Sep 2014
    Messaggi
    58
    Thanked: 0
    attento a non usare detersivi con soda caustica però , perchè faresti un bel fumogeno ahahahaha ==PP


  6. #5
    Junior CTzen
    Data Registrazione
    Nov 2011
    Località
    Suzzara
    Messaggi
    125
    Thanked: 0
    Grazie, quindi un po d'acqua distillata non basta? Ci vuole uno sgrassatore?
    CPU: CPU:I7 5820k Ram: 32gb G.Skill Ripjaws 4 2800Mhz GPU: Sli 970 Galax HOF HD: samsung 250gb 850 EVO, 3 WD Blue 1tb, Alimentatore Corsair ax1500i Masterizzatore Blu Ray Asus BW16D1HT Scheda audio Creative ZX Nzxt Hue RGB Tastiera Corsair K70 RGB Mouse Mad Catz Rat 9 Monitor: Dell u3415


  7. #6
    CTzen
    Data Registrazione
    Jul 2015
    Località
    Padova
    Messaggi
    221
    Thanked: 30
    provenienza? con che liquido è stato usato? per quanto tempo?
    se non sai la risposta a queste domande ti conviene aprirlo e verificare
    per quanto tempo dovrai usarlo senza poterlo smontare? molto? ti conviene aprirlo e verificare

    non serve chissà quale sgrassatore, basta un detersivo qualunque e un pò di sfregamento
    (ideale lo spazzolino da denti)


  8. #7
    Junior CTzen
    Data Registrazione
    Nov 2011
    Località
    Suzzara
    Messaggi
    125
    Thanked: 0
    Citazione Originariamente Scritto da chimico_9 Visualizza Messaggio
    provenienza? con che liquido è stato usato? per quanto tempo?
    se non sai la risposta a queste domande ti conviene aprirlo e verificare
    per quanto tempo dovrai usarlo senza poterlo smontare? molto? ti conviene aprirlo e verificare

    non serve chissà quale sgrassatore, basta un detersivo qualunque e un pò di sfregamento
    (ideale lo spazzolino da denti)
    Mi puoi dare qualche nome così vado sul sicuro non vorrei rovinarlo, il mio è nickel acetal
    CPU: CPU:I7 5820k Ram: 32gb G.Skill Ripjaws 4 2800Mhz GPU: Sli 970 Galax HOF HD: samsung 250gb 850 EVO, 3 WD Blue 1tb, Alimentatore Corsair ax1500i Masterizzatore Blu Ray Asus BW16D1HT Scheda audio Creative ZX Nzxt Hue RGB Tastiera Corsair K70 RGB Mouse Mad Catz Rat 9 Monitor: Dell u3415


  9. #8
    CTzen
    Data Registrazione
    Jul 2015
    Località
    Padova
    Messaggi
    221
    Thanked: 30
    detersivo liquido per le mani, per i piatti, per il bucato, shampoo, docciaschiuma, igiene intima, ...
    ci siam capiti ?
    es. evita quelli in polvere, lo sgrassatore per i fornelli o detersivo per lavastoviglie
    che possono risultare aggressivi
    risciaqui bene con acqua normale e poi con distillata

    ci sono i mostri dentro stò wb?


  10. #9
    Junior CTzen
    Data Registrazione
    Nov 2011
    Località
    Suzzara
    Messaggi
    125
    Thanked: 0
    Grazie ho capito.
    CPU: CPU:I7 5820k Ram: 32gb G.Skill Ripjaws 4 2800Mhz GPU: Sli 970 Galax HOF HD: samsung 250gb 850 EVO, 3 WD Blue 1tb, Alimentatore Corsair ax1500i Masterizzatore Blu Ray Asus BW16D1HT Scheda audio Creative ZX Nzxt Hue RGB Tastiera Corsair K70 RGB Mouse Mad Catz Rat 9 Monitor: Dell u3415


  11. #10
    CTzen L'avatar di AR3S
    Data Registrazione
    Feb 2011
    Località
    Martina Franca (TA)
    Messaggi
    274
    Thanked: 44
    Sul blog di ekwb c'è una guida

    How to clean water blocks?

    Citazione Originariamente Scritto da Blog EKWB
    How to clean water blocks?

    Water blocks may be disassembled for cleaning purposes on an occasional basis. The warranty is not rendered void on dis-assembly of the water block, but the customer loses the EK leak-free guarantee which comes with a factory tested water block. An old, but soft toothbrush is an excellent cleaning tool!

    Cleaning bare copper


    When cleaning bare copper is it recommended to use slightly acidic cleaning agents which include the following organic agents:
    • (White) vinegar (acetic acid up to 5-10%)
    • Lemon juice (citric acid up to 5-10%)


    Certain food can also be used for cleaning copper:
    • Cola (contains phosphorous- and citric acid)
    • Ketchup or tomato extract (contains acetic- and citric acid)
    • Mustard (contains acetic acid)


    5% vinegar is enough to kill 99.9% of algae and bacteria that could be present on copper in not maintained cooling loop as well.

    Upon cleaning, it is necessary to flush the water blocks in water and rinse them with distilled water. After rinsing, we recommend wrapping the water blocks in paper towels until completely dry. It is nearly impossible to avoid naturally occurring copper tarnishing (oxidation) as the oxidation will reoccur the moment the copper is cleaned of the all oxides.

    Cleaning nickel plated copper


    When cleaning nickel plated copper, it is forbidden to use any aggressive chemicals (or vinegar) or rough materials as you may damage the plating and thus void the warranty. Please note also that due to presence of dye additives and other chemicals, the nickel layer may also become discolored/stained over a period of time. However, the staining is normally reversible by simple flush and rinse.

    Cleaning the nickel plated copper should consist of these steps:
    • Flush the nickel plated copper under warm water
    • Clean the surface using a damp non-abrasive cloth and rinse with clean water
    • Polish the hardened deposits (such as algae or dirt) from the nickel plated copper if necessary.


    EK recommends the use of automotive soft, non-abrasive metal polish creams. After you finish using other cleaning methods, give the nickel plating a good polish with a non-abrasive metal or chrome polish. Apply a small amount of polish to a cloth or to the surface of the nickel. Wipe the entire surface of the nickel with the polish, using small circular motions, until it looks shiny and clean. Use another clean cloth to remove the remains of the polishing paste from the surface. Always rinse with distilled water after you are done with polishing.

    Cleaning acrylic (Plexi) glass tops


    Acrylic will fail prematurely if subjected to even small amounts of alcohol, acetone or other aggressive chemicals. Please do not use anything but warm, soapy water and a toothbrush to clean the acrylic (plexi) glass water block tops and reservoir tubes. Using aggressive chemicals will surely void your warranty!

    Algae- or dirt deposits may be rubbed out using a soft cloth in combination with warm, soapy water. Rinse with distilled water after cleaning.

    Cleaning POM (Acetal) tops


    POM (polyoxymethylene) or Acetal can withstand chemicals such as alcohol or acetone but EK recommend using these very sparingly as the drying chemicals will certainly leave some residue. Usually POM can be cleaned easily with just a soft cloth and warm, soapy water – without the use of any chemicals. Rinse with distilled water after cleaning.

    Preventive steps:

    1. Using a corrosion inhibiting coolant (such as EK-Ekoolant or other market proven coolant) is highly recommended for any water cooling loops. Since EK-Ekoolant is also a surfactant, it will prevent algae growth and dirt deposition on all wet surfaces.
    2. Clean the radiators and flush them with warm water prior to use. You may use a vinegar/water solution. Radiators are – due to the nature of manufacturing – usually the source of all dirt particles found on the loop. Always rinse the radiators with distilled water after you have finished cleaning.
    3. Refrain from using Copper Sulphate based additives in your loop in order to prevent tarnishing on your water cooling gear internals!




    Ultima modifica di AR3S; 16-09-2016 alle 02:08 PM

  12. I seguenti utenti hanno ringraziato AR3S per questo utile messaggio:

    fraggerman (17-09-2016)



Permessi di Scrittura

  • Tu non puoi inviare nuove discussioni
  • Tu non puoi inviare risposte
  • Tu non puoi inviare allegati
  • Tu non puoi modificare i tuoi messaggi
  •